Episodes

  • Demonsrating a cigar box guitar with a "hum bucker" pickup

    Demonsrating a cigar box guitar with a "hum bucker" pickup
    May 15 2024
    In this episode, I play a cigar box guitar I built from a premade poplar cigar box guitar neck, a cigar box, wood dowels, machine head tuners, brass ferrules, wood screws and guitar strings. I happen to love playing blues music and so what I play is an improvised blues tune.

    Hosted on Acast. See acast.com/privacy for more information.
    Show More Show Less
    2 mins
  • Demonstrating a cigar box guitar

    Demonstrating a cigar box guitar
    May 14 2024
    In this episode, I demonstrate the first cigar box guitar I ever built. This one is over twenty years old. A neighbor and friend tweaked the design by adding a piece of cedar to the headstock, among other improvements. This instrument has three strings. I often play blues music on it, as I do here in this recording.

    Hosted on Acast. See acast.com/privacy for more information.
    Show More Show Less
    2 mins
  • Clay ocarinas

    Clay ocarinas
    May 13 2024
    In this episode, I demonstrate a variety of clay whistles and globular flutes, aka ocarinas, I have made in the past.

    Hosted on Acast. See acast.com/privacy for more information.
    Show More Show Less
    4 mins
  • Ocarinas from plastic gum ball containers and cardboard

    Ocarinas from plastic gum ball containers and cardboard
    May 13 2024
    In this episode, I demonstrate two ocarinas I made from plastic containers from gum ball machines. Gum ball machines not only dispense gum but also trinkets, key rings, key chains and toys housed in small plastic containers. Basically, I drilled holes in the bottoms and lids of two such containers and fastened cardboard mouthpieces to the lids with hot glue. The tubes are just strips of cardboard creased and folded over in such a way as to form rectangular tubes. I used tape to keep the mouthpieces from opening up again. The large ocarina has four finger holes and two thumb holes while the small ocarina has four finger holes.

    Hosted on Acast. See acast.com/privacy for more information.
    Show More Show Less
    2 mins
  • Demonstrating a wood whistle and two flutes

    Demonstrating a wood whistle and two flutes
    May 10 2024
    In this episode, I demonstrate a wood whistle and two flutes. All three instruments are made from inner corner molding, inch diameter wood dowel and bamboo.

    Hosted on Acast. See acast.com/privacy for more information.
    Show More Show Less
    2 mins
  • Demonstrating wood Native American style flutes

    Demonstrating wood Native American style flutes
    May 10 2024
    In this episode, I demonstrate two Native American style flutes I made from inner corner molding, dowels and pieces of scrap wood. I fastened the wood blocks in place with packaging string and elastic bands.

    Hosted on Acast. See acast.com/privacy for more information.
    Show More Show Less
    2 mins
  • Double flute

    Double flute
    May 10 2024
    In this episode, I demonstrate a double flute I made from inner corner molding, a wood slat, an inch diameter dowel and bamboo. This double flute has two mouth pieces.The wood slat divides the flute in two sections, Each section has four finger holes.

    Hosted on Acast. See acast.com/privacy for more information.
    Show More Show Less
    1 min
  • Demonstrating a homemade wood drone flute

    Demonstrating a homemade wood drone flute
    May 10 2024
    In this episode, I demonstrate a drone flute I made from inner corner molding, a wood slat, an inch diameter dowel and piece of bamboo. Drone flutes have two parts. One has finger holes and the other does not. The side lacking finger holes provides a simple harmony in the form of a single note while the side with finger holes provides the melody.

    Hosted on Acast. See acast.com/privacy for more information.
    Show More Show Less
    1 min